|
SFDs with mechanical seal – Identification
Delgado, A., and San Andrés, L., 2008, “Nonlinear
Identification of Mechanical Parameters on a Squeeze Film Damper with
Integral Mechanical Seal,” ASME Paper GT2008-50528 (accepted for ASME J of
Eng Gas Turbine and Power)
San Andrés, L., and A. Delgado, 2008, ”Squeeze film
Damper with a Mechanical Seal: Experimental Force Coefficients Derived from
Circular Centered Orbits,” ASME Journal of Engineering for Gas Turbines and
Power, Vol. 130, pp. 042505-1-8 (ASME Paper No GT2007-27436)
San Andrés, L., and A. Delgado, 2007, “Identification of
Force Coefficients in a Squeeze Film Damper with a Mechanical Seal, I:
Unidirectional Load Tests,” ASME Journal of Engineering for Gas Turbines and
Power, 129(3), pp. 858-864
San Andrés, L., and A. Delgado, 2007, “Identification of
Force Coefficients in a Squeeze Film Damper with a Mechanical Seal, Centered
Circular Orbit Tests,” ASME Journal of Tribology, Vol. 129(3), pp. 660-668.
San Andrés, L., and A. Delgado, 2006, “Identification of
Force Coefficients in a Squeeze Film Damper with a Mechanical End Seal,”
Paper CELT06-74, Memorias del IX Congreso y Exposición Latinoamericana de Turbomaquinaria,
Boca del Río Veracruz,
Mexico, June 22-23, 2006, ISBN 968-6114-20-3
|
|
SFDs: invited papers & articles
|
|
Zeidan, F., L. San Andrés, and J.
Vance, "Design and Application of Squeeze Film Dampers in Rotating
Machinery," Proceedings of the 25th Turbomachinery Symposium,
Turbomachinery Laboratory, Texas
A&M University,
September, pp. 169-188, 1996.
San Andrés, L.,
"Squeeze Film Dampers, A History of their Technological
Development," De Appel Nr. 3, pp. 11-13,
February 2000 (Magazine from the Isaac Newton Mechanical Engineering Student
Society at Universiteit Twente,
The Netherlands).
|
|
Effects of air entrainment and bubbly lubricants
on SFD forced performance
|
|
San Andrés, L., and O. De Santiago, 2005, “Identification of Journal Bearing Force Coefficients
Under High Dynamic Loading,” STLE Tribology Transactions, Vol. 48, 1, pp.
9-17
De Santiago, O., and L. San Andrés, 2004, “Forced Response of a Squeeze Film
Damper and Identification of Force Coefficients from Large Orbital Motions,”
ASME Journal of Tribology, Vol. 126, 2, pp. 292-300 (ASME Paper
2003-TRIB-162)
San Andrés, L., and O. de Santiago, 2004, “Dynamic
Response of Squeeze Film Dampers Operating with Bubbly Mixtures,” ASME
Journal of Gas Turbines and Power, Vol. 126, 2, pp. 408-415. (ASME Paper
2002-GT-30317)
San Andrés, L., and S. Diaz, 2003, “Flow Visualization
and Forces from a Squeeze Film Damper with Natural Air Entrainment,” ASME
Journal of Tribology, Vol. 125, 2, pp. 325-333 (ASME Paper 2002-TRIB-81).
Diaz, S., and L. San Andrés, 2002, “Pressure Measurements and Flow
Visualization in a Squeeze Film Damper Operating with a Bubbly Mixture,” ASME
Journal of Tribology, Vol. 124, 4, pp. 346-350 (ASME Paper 2001-TRIB-118)
Diaz, S., and L. San Andrés, L., A Model for Squeeze Film Dampers
Operating with Air Entrainment and Validation with Experiments,” ASME Journal
of Tribology, Vol. 123, 1, pp. 125-133, 2001. (ASME Paper 2000-Trib-207).
|
|
San Andrés, L., S. Diaz, and L. Rodriguez, “Sine Sweep Load Versus Impact Excitations and
their Influence on the Damping Coefficients of a Bubbly Oil Squeeze Film
Damper,” Tribology Transactions, Vol. 44, 4, pp. 692-698, 2001 (Paper STLE
01-NP-18).
Beets, T., S. Diaz, and L San Andrés,
"Pressure Measurement and Flow Visualization on a SFD Operating With a
Bubbly Lubricant," Proceedings of the 2000 NSF Design &
Manufacturing Research Conference, CD rom, Vancouver,
Canada, January 3-6, 2000 (Award number 9820845 CMS).
|
|
Tao, L., S. Diaz, L. San Andrés, and K.R. Rajagopal, "Analysis of Squeeze Film Dampers
Operating with Bubbly Lubricants" ASME Journal of Tribology, Vol. 122,
1, pp. 205-210, 2000 (ASME Paper 99-TRIB-33).
|
|
Diaz, S., and L. San Andrés, "Air Entrainment Versus Lubricant
Vaporization in Squeeze Film Dampers: An Experimental Assessment of their
Fundamental Differences,” ASME Journal of Gas Turbines and Power, Vol. 123
(4), pp. 871-877, 2001. (ASME Paper 99-GT-187).
|
|
Diaz, S., and L. San Andrés, "A Method for Identification of Bearing
Force Coefficients and its Application to a Squeeze Film Damper with a Bubbly
Lubricant," STLE Tribology Transactions, Vol. 42, 4, pp. 739-746, 1999,
(STLE Paper 99-AM-5).
|
|
San Andrés, L., and S. Diaz, "Effects of Bubbly Oil
on Squeeze Film Damper Force Performance," Proceedings of the VI PACAM
Conference, Rio de Janeiro, Brazil, January 1999, Applied Mechanics in the
Americas, Volume 8, Dynamics, pp. 1523-1526.
|
|
Diaz, S., and L. San Andrés, "Reduction of the Dynamic Load Capacity
in a Squeeze Film Damper Operating with a Bubbly Lubricant", ASME
Journal of Gas Turbines and Power Vol. 121, pp. 703-709, 1999 (ASME Paper
98-GT-109).
|
|
Diaz, S., and L. San Andrés, "Effects of Bubbly Flow on the Dynamic
Pressure Fields of a Test Squeeze Film Damper," ASME Fluids Engineering
Division Summer Meeting (FEDSM’98), Washington,
DC June 1998.
|
|
Diaz, S., and L. San Andrés, "Measurements of Pressure in a Squeeze
Film Damper with an Air/Oil Bubbly Mixture," STLE Tribology
Transactions, Vol. 41, 2, pp. 282-288 (STLE Paper 97-WTC-8), 1998.
|
|
Imbalance response of a test rotor
supported on SFDs
|
|
De Santiago, O., and
L. San Andrés, “Imbalance Response of a Rotor Supported on Flexure Pivot
Tilting Pad Journal Bearings in Series with Integral Squeeze Film Dampers,”
2003, ASME Journal of Gas Turbines and Power, Vol. 115 (4), pp. 1026-1032
(ASME Paper 2001-GT-257).
De Santiago, O., and
L. San Andrés, "Dynamic Response of a Rotor-Integral Squeeze Film Damper
to Couple Imbalances,” accepted for publication at ASME Journal of Gas
Turbines and Power (ASME Paper 2000-GT-0388).
Diaz, S. and L. San Andrés, L., "Orbit-Based Identification of
Damping Coefficients on Off-Centered Squeeze Film Dampers Including Support
Flexibility," ASME Paper 2000-GT-0394.
|
|
De Santiago, O., and L. San Andrés, "Imbalance Response and Damping Force
Coefficients of a Rotor Supported on End Sealed Integral Squeeze Film
Dampers," ASME Paper 99-GT-203 (for publication at ASME Journal of Gas
Turbines and Power).
|
|
De Santiago, O., San Andrés, L., and J. Oliveras,
"Imbalance Response of a Rotor Supported on Open-Ends, Integral Squeeze
Film Dampers," ASME Journal of Gas Turbines and Power, Vol. 121, 4, pp.
718-724, 1999 (ASME Paper 98-GT-006)
|
|
Lubell, D., and L., San Andrés,
"Imbalance Response of a Test Rotor Supported on Squeeze Film
Dampers," ASME Journal of Engineering for Gas Turbines and Power, Vol.
120, 2, pp. 397-404 (ASME Paper 97-GT-12), 1998.
|
|
De Santiago, O., and
L. San Andrés, "Measurements of the Synchronous Response of a Rotor
Supported on Integral Squeeze Film Dampers: Couple Imbalance
Experiments," Memorias del VII Congreso
Latinoamericano de Turbomaquinaria,
pp. 43-47, Veracruz,
Mexico,
November 1998.
|
|
Lubell, D., and L., San Andrés,
"Imbalance Response of a Squeeze Film Damper Supported Rotor," Memorias del VI Congreso Latinoamericano de Turbomaquinaria,
Mexico,
Mexico,
pp. 89-96, November 1997.
|
|
|
|
Effects of lubricant vapor cavitation
and pressurization on SFD performance
|
|
San Andrés, L.,
"Theoretical and Experimental Comparisons for Damping Coefficients of a
Short Length Open-End Squeeze Film Damper," ASME Journal of Engineering
for Gas Turbines and Power, Vol. 118, 4, pp. 810-815, (ASME Paper 95-GT-98),
1996.
|
|
Lopez, A., L. San
Andrés, and F. Baquero, "Effect of
Pressurization on a Squeeze Film Damper: Experimental Results," Memorias del V Congreso Latinoamericano de Turbomaquinaria,
Acapulco, Mexico, November, pp. 231-238,
1995.
|
|
Effects of feed grooves on SFD
forced performance
|
|
Arauz, G., and L. San Andrés,
"Experimental Force Response of a Grooved Squeeze Film Damper,"
Tribology International, Vol. 30, 1, pp. 77-86, 1997.
|
|
Arauz, G., and L. San Andrés,
"Experimental Study on the Effect of a Circumferential Feeding Groove on
the Dynamic Force Response of a Sealed Squeeze Film Damper," ASME
Journal of Tribology, Vol. 118, 4, pp. 900-905, (ASME Paper 95-Trib-50),
1996.
|
|
Arauz, G. and L. San Andrés,
"Effect of a Circumferential Feeding Groove on the Force Response of a
Short Squeeze Film Damper," ASME Journal of Tribology, Vol. 116, 2, pp.
369-377, (ASME Paper 93-Trib-15), 1994.
|
|
San Andrés, L., and Arauz, G., "Experimental Study of a Grooved Squeeze
Film Damper," Proceedings of the III Congreso Latinoamericano de Turbomaquinaria,, Cuernavaca, Mexico,
February, pp. 11-18, 1993.
|
|
San Andrés, L., and G.
Arauz, "Experimental Pressures and Film Forces
in a Squeeze Film Damper," ASME Journal of Tribology, Vol. 115,
pp.134-140,1993
|
|
San Andrés, L., and Arauz, G., "Experimental Study of a Groove Squeeze
Film Damper," Proceedings of the III Congreso Latinoamericano de Turbomaquinaria,, Cuernavaca, Mexico,
February, pp. 11-18, 1993.
|
|
San Andrés, L.,
"Analysis of Short Squeeze Film Dampers with a Central Groove,"
ASME Journal of Tribology, Vol. 114, 4, pp. 659-665, 1992.
|
|
Effect of fluid inertia and
lubricant vapor cavitation on SFD performance
|
|
Robison, M., G. Arauz, and L. San Andrés, "A Test Rig for the
Identification of Rotordynamic Coefficients of Fluid Film Bearings,"
ASME Turbo Expo'95 Land, Sea and Air Conference, Houston, ASME Paper 95-GT-431, 1995.
|
|
Sundarajan, P. S. Noah, and L. San
Andrés, "Fluid Inertia Effects on the Non-Linear Response of a Rigid
Rotor Supported on Squeeze Film Dampers," Proceedings of the 4th
International IFToMM Rotordynamics Conference,
Chicago, pp.333-340, September 1994
|
|
San Andrés, L., Meng, G. and Yoon, S., "Dynamic Force Response of an
Open Ended Squeeze Film Damper," ASME Journal of Engineering for Gas
Turbines and Power, Vol. 115,2, pp. 341-343, 1993.
|
|
San Andrés, L., Meng, G. and Yoon, S., "Dynamic Force Response of an
Open Ended Squeeze Film Damper," ASME Journal of Engineering for Gas
Turbines and Power, Vol. 115,2, pp. 341-343, 1993.
|
|
San Andrés, L., Meng, G. and Vance, J., "Experimental Measurement of
the Dynamic Pressure and Force Response of a Partially Sealed Squeeze Film
Damper," 13th Biennial Conference on Mechanical Vibration and Noise,
Miami, FLA, Rotating Machinery and Vehicle Dynamics, ASME Publication, DE-Vol. 35, pp. 251-256, September 1991.
|
|
San Andrés, L.,
"Effect of Fluid Inertia on Force Coefficients for the Long Squeeze Film
Damper," STLE Tribology Transactions, Vol. 31, 2, pp. 371-375, 1988.
|
|
San Andrés, L. and
Vance, J., "Effect of Fluid Inertia on the Performance of Squeeze Film
Damper Supported Rotors," ASME Journal of Engineering for Gas Turbine
and Power, Vol. 110, 1, pp. 51-57, 1988.
|
|
San Andrés, L. and
Vance, J., "Experimental Measurement of the Dynamic Pressure
Distribution in a Squeeze-Film Bearing Damper Executing Circular Centered
Orbits," ASLE Transactions, Vol. 30, No. 3, pp. 373-383, 1987.
|
|
San Andrés, L. and
Vance, J., "Effect of Fluid Inertia on Finite Length Sealed Squeeze Film
Dampers," ASLE Transactions, Vol. 30, No. 3, pp. 384-393, 1987
|
|
San Andrés, L. and
Vance, J., "Effect of Fluid Inertia on Squeeze Film Damper Forces for
Small Amplitude Circular Centered Motions," ASLE Transactions, Vol. 30,
No. 1, pp. 69-76, 1987.
|
|
San Andrés, L. and
Vance, J., "Force Coefficients for Open Ends Squeeze Film Dampers
Executing Small Amplitude Motions About an Off-Centered Equilibrium
Position," ASLE Transactions, Vol. 30, No. 1, pp. 63-68, 1987.
|
|
San Andrés, L. and
Vance, J., "Effects of Fluid Inertia and Turbulence on the Force
Coefficients for Squeeze Film Dampers," ASME Journal of Engineering for
Gas Turbines and Power, Vol. 108, pp. 332-339, 1986.
|