Publications on Parameter
Identification
MAJOR APPLICATION: On-Site
Identification of Bearing Support Force Coefficients
Sponsors:
Turbomachinery Research Consortium (1999-2004) ~ $100,000
Magazine Articles
De Santiago, O., and L.,
San Andrés, 2007, “Experimental Identification of Bearing Dynamic Force
Coefficients in a Flexible Rotor – Further Developments,” Tribology &
Lubrication Technology, June 2007, pp. 40-50.
De Santiago, O., and L.,
San Andrés, 2004, ”Identification of Bearing Force Coefficients from Measurements
of Imbalance Response of a Flexible Rotor”, reproduction of ASME Paper GT
2004-54160, INSIGHTS, a publication
of the Dresser-Rand Co., Vol. 7, 1, pp.
14-20
Journal
& Conference Publications (all peer reviewed)
De Santiago, O., and L.,
San Andrés, 2007, “Experimental Identification of Bearing Dynamic Force
Coefficients in a Flexible Rotor – Further Developments,” Tribology Transactions, v. 50(1), p. 114-126.
De Santiago, O., and L. San
Andrés, 2005, “Identification of Bearing Force Coefficients in Flexible Rotors:
Extensions to Method,” Paper WTC 2005-63276, III World Tribology Conference,
San Andrés, L., and O. De Santiago, 2005, “Identification of Journal
Bearing Force Coefficients Under High Dynamic
Loading,” STLE Tribology Transactions, Vol. 48, 1, pp. 9-17
De Santiago, O., and L., San Andrés, 2004,
“Identification of Bearing Force Coefficients in Flexible Rotor Systems”,
Eighth International Conference on Vibrations in Rotating Machinery, September
7th to 9th, 2004, University of Wales, Swansea, Wales
De Santiago, O., and L.,
San Andrés, 2004, “Identification of Bearing Force Coefficients from
Measurements of Imbalance Response of a Flexible Rotor”, ASME Paper GT
2004-54160
De Santiago, O., and L.
San Andrés, 2004, “Forced Response of a Squeeze Film Damper and Identification
of Force Coefficients from Large Orbital Motions,” ASME Journal of Tribology,
Vol. 126, 2, pp. 292-300 (ASME Paper 2003-TRIB-162)
De Santiago, O., and L.,
San Andrés, 2007, “Field Methods For Identification of
Bearing Support Parameters. Part I-Identification from Transient Rotor Dynamic
Response Due to Impacts,” ASME Journal of Engineering for Gas Turbines and
Power, 129, pp. 205-212.(ASME
Paper GT 2003-38583)
De Santiago, O., and L.,
San Andrés, 2007, “Field Methods For Identification of
Bearing Support Parameters. Part II-Identification from Rotordynamic Response
due to Imbalances,” ASME Journal of Engineering for Gas Turbines and Power, 129,
pp. 213-219(ASME Paper GT 2003-38585)
Diaz, S. and L. San
Andrés, 2000, “Orbit-Based Identification of Damping Coefficients on
Off-Centered Squeeze Film Dampers Including Support Flexibility,” ASME Paper
2000-GT-0394
San Andrés, L., S. Diaz, and L. Rodriguez, 2001, “Sine Sweep Load Versus Impact Excitations and
their Influence on the Damping Coefficients of a Bubbly Oil Squeeze Film
Damper,” Tribology Transactions, Vol. 44, 4, pp. 692-698 (Paper STLE 01-NP-18).
Diaz, S., and L. San Andrés, 1999, "A
Method for Identification of Bearing Force Coefficients and its Application to
a Squeeze Film Damper with a Bubbly Lubricant,” STLE Tribology Transactions,
Vol. 42, 4, pp. 739-746 (STLE Paper 99-AM-5)
Robison, M., G. Arauz, and L. San Andrés, 1995,
"A Test Rig for the Identification of Rotordynamic Coefficients of Fluid
Film Bearings," ASME Paper 95-GT-431
Research Progress Reports to the
Turbomachinery Research Consortium (TRC):
(available
only to the industrial members of the Turbomachinery Research Consortium)
Balantrapu, K., and L San Andrés, 2004, “Identification
of Force Coefficients in Flexible Rotor-Bearing Systems – Enhancements and
Further validations,” TRC-B&C-1-04
San Andrés, L., 2003, “A
Method for Identification of Force Coefficients in Flexible Rotor-Bearing
Systems,” TRC-B&C-2-03.
San Andrés, L., 2003, “Journal Bearing
Force Coefficients under High Dynamic Loading – Experimental Results,” TRC-B&C-3-03.
Oscar de Santiago, 2002, “Identification of Bearing Supports’
Force Coefficients from Rotor Responses due to Imbalances and Impact Loads,”
TRC-RD-1-02.
San Andrés, L.,
2002, “Response of a Squeeze Film Damper Under High
Dynamic Loading and Identification of Damping and Inertia Coefficients,”
TRC-SFD-1-02.
San Andrés, L.,
2001, “Parameter Identification of Series Bearing Supports from Imbalance
Response and Impact Excitations”, TRC-RD-1-01.
Rodriguez, L., S. Diaz, and L. San Andrés,
2000, “Sine Sweep Load Versus Impact Excitations and their Influence on the
Identification of Damping in a Bubbly Oil Squeeze Film Damper,” TRC-SFD-3-00